Thanks Dust
From the photos of the auction it looks like the supplied wires are only R/Bk/G, into the endstop, so that should keep things simple...
Will keep it in mind when I get them- anything out of the ordinary I will be sure to raise :)
Parts are shipped for 4/7 suppliers from Aliexpress, still to source printed parts and J-head this week.
Looking again at the wiki, I see there is a pretty comprehensive guide on the i3 re-work (with greg's extruder, built in end-stop mounts, 10mm threaded rod and 624 x-idler bearing) so I will base my fasteners off that, as I have still to source those as well.
Cheers
From the photos of the auction it looks like the supplied wires are only R/Bk/G, into the endstop, so that should keep things simple...
Will keep it in mind when I get them- anything out of the ordinary I will be sure to raise :)
Parts are shipped for 4/7 suppliers from Aliexpress, still to source printed parts and J-head this week.
Looking again at the wiki, I see there is a pretty comprehensive guide on the i3 re-work (with greg's extruder, built in end-stop mounts, 10mm threaded rod and 624 x-idler bearing) so I will base my fasteners off that, as I have still to source those as well.
Cheers